- Out-of-Stock
日常生活中衣物總是不小心沾上污漬👕 食物醬料滴落、化妝品沾染、原子筆畫到、咖啡飲料,這些往往都是難清洗嘅污漬地雷,祇要你帶著呢個DAJIWOR 神奇衣物瞬效去漬劑就唔怕啦!
✅ 強效去汙
✅ 含天然表面活性劑
✅ 無添加有害物質
讓你不用再擔心~馬上為你解決各種尷尬的意外🤗
祇要在沾到污漬的地方擠上適量的去漬劑,等去漬劑滲透過布料,即可開始搓揉髒污點,就會發現剛剛的污漬漸漸消失不見啦‼️
可強效清除局部汙漬,再難纏的汙漬都可輕鬆瓦解,讓汙漬來有影去無蹤😏
🔺 請注意材質🔻
毛衣類、動物真毛皮類、皮革類等需乾洗產品,通通不能夠使用喔!
使用期: 2024年
FPS
Octopus
Free local shipping for any purchase (after discount) over $600
Attention:
- This Product prevents the production of mold and does not mean mold can be completely removed.
- The effect will be slightly different with the time of use. It is recommended to replace it after 6 months of use.
- Anti-mold is a kind of organism and the effect may be different depends on the environment.
- In order to avoid mold necrosis, please do not use with other chemical insecticides or dehumidifiers. Do not use this product with detergents or medicines, and do not use insecticides in indoor places where this product is installed. Please take this product out of the room before using insecticide.
- This product is exclusively for bathroom, please do not use it in other occasions.
- Please do not place it where infants and young children can reach.
- Please keep away from fire, high temperature and direct sunlight.
Capacity: 30L
Rated Voltage: 220V
Rated Power: 50Hz
Rated Power: 1000W
Color: Beige
Ingredients: Water, Sodium Chloride, Hypochlorous Acid, Sodium Hypochlorite
Helps heal wounds, cuts, abrasions and burns. Eliminates 99.99% of bacteria and viruses including H7N9, MRSA, Straph and Strep, within 30 seconds of application. Safe for use by infants, children and elderly. Compact and easy to carry around while traveling. Can also be used to sterilise all surfaces.
**We are designated distributor for Dermodacyn’s products**
Instructions:
1. double-sided sticker on back can attach to the surface directly
2. Please dry the surface to prevent falling off before attaching
3. Uneven or damp surfaces may reduce the adhesion force
4. Stop using the air conditioner before installing
5. Do not install on the power socket
6. Stick the product on air inlet of the air conditioner
7. Suitable for both window and split air conditioner
Notes:
- Keep out of reach of children
- Due to the characteristics of this product, you may smell the peculiar smell when opening or installing it for a period of time. Smell will disappear after then and will not affect the quality
- The duration of the effect may vary depends on the conditions of use
- Depending on the situation, when the amount of organic matter is abnormally high, it will take longer time to show the effect
- Do not use it in combination with products withe high sterilization and antibacterial effects
- The Effect will be slightly different with the time of use. It is recommended to replace a new one every 3-month
- The product inhibits the growth of mold, but the pigment of mold cannot be removed. And effect may be different depending on the environment
- It may fall off due to uneven surfaces and the material of the pasted parts. Diuble-sided sticker may remain on the adhesion point
- Do not use it for purposes other than the intended purpose
Instructions:
1. double-sided sticker on back can attach to the surface directly
2. Please dry the surface to prevent falling off before attaching
3. Uneven or damp surfaces may reduce the adhesion force
4. Stop using the air conditioner before installing
5. Do not install on the power socket
6. Stick the product on air inlet of the air conditioner
7. Suitable for both window and split air conditioner
Notes:
- Keep out of reach of children
- Due to the characteristics of this product, you may smell the peculiar smell when opening or installing it for a period of time. Smell will disappear after then and will not affect the quality
- The duration of the effect may vary depends on the conditions of use
- Depending on the situation, when the amount of organic matter is abnormally high, it will take longer time to show the effect
- Do not use it in combination with products withe high sterilization and antibacterial effects
- The Effect will be slightly different with the time of use. It is recommended to replace a new one every 3-month
- The product inhibits the growth of mold, but the pigment of mold cannot be removed. And effect may be different depending on the environment
- It may fall off due to uneven surfaces and the material of the pasted parts. Diuble-sided sticker may remain on the adhesion point
- Do not use it for purposes other than the intended purpose
Call us
Orders support!
Working Hours