- Out-of-Stock
🌈 大人小朋友一齊同樂既養蝦樂趣水族箱🌈
高級版多咗唔同嘅裝飾超可愛,送禮物/自用一流
飼養方法:
1. 先用水徹底清洗玻璃石,再將玻璃石倒入魚缸中
2. 加一般室溫清水至魚缸中的約3分之2滿,再倒入乾燥蝦卵(藍)接上打氧氣滴,打氣約一分鐘。
3. 用模型及貝殼裝飾魚缸
4. 蓋上蓋子便完成了 (3-5天就會孵出蝦寶寶)
蝦寶寶出生第四天,可以開始餵飼料粉(紅色包)。千萬不要倒太多,約2-3天餵食一次,每次一點點即可)‼️ 記得每天要幫小蝦打氧氣(缺氧的話蝦會死掉喔)
🦐 小蝦是海蝦🦐
大約30~50只左右的小蝦會ㄧ次出生。
剛出生的小蝦雖然很小,但是吃着食物成長。
4周後長1cm~2cm左右。
大頭蝦是公的,小蝦是母的
小蝦是配對生蛋的,是新的會生出小蝦。
💫 將水的溫度維持在20度左右 (20度在正常常溫下放水時的溫度)
💫 孵化時間因環境不同而不同。 (約1~5日)
💫 每天抽水3次以上。(按壓一次時按壓10次左右)
💫 小蝦不換水。
💫 水的高度縮小1cm以上時,請補充一天以上的自來水。
產品包含:
水族箱(12cm x 10cm)x 1
乾燥蝦卵x 1(藍色袋子)
飼料x 1(黃色袋子)
湯匙x 1
放大鏡x 1
打氧氣滴管x 1
公仔(海獅/北極熊)x 1
水晶佈置x 2
屋仔x 1
樹仔x 1
貝殼x 2
⚠️ 飼養盒請置於陰涼處,以免變質
⚠️ 因蝦子體型很小,請勿換水以免流走,可定期補充部分蒸發水份
⚠️ 請勿食用蝦食和水質淨化劑
FPS
Octopus
Free local shipping for any purchase (after discount) over $600
Size: approx. 88.5 x 88.5 x 38mm
Weight: approx. 370g
Rechargeable battery: Li-ion polymer batery 3.7V, 5000mAh x 2
Output: DC5V 2A
Temperature: approx. 45-55
Charging time: approx. 5 hrs
Continuous working time: approx. 8 hrs (weak) to 5 hrs (strong)
Instructions:
1. double-sided sticker on back can attach to the surface directly
2. Please dry the surface to prevent falling off before attaching
3. Uneven or damp surfaces may reduce the adhesion force
4. Stop using the air conditioner before installing
5. Do not install on the power socket
6. Stick the product on air inlet of the air conditioner
7. Suitable for both window and split air conditioner
Notes:
- Keep out of reach of children
- Due to the characteristics of this product, you may smell the peculiar smell when opening or installing it for a period of time. Smell will disappear after then and will not affect the quality
- The duration of the effect may vary depends on the conditions of use
- Depending on the situation, when the amount of organic matter is abnormally high, it will take longer time to show the effect
- Do not use it in combination with products withe high sterilization and antibacterial effects
- The Effect will be slightly different with the time of use. It is recommended to replace a new one every 3-month
- The product inhibits the growth of mold, but the pigment of mold cannot be removed. And effect may be different depending on the environment
- It may fall off due to uneven surfaces and the material of the pasted parts. Diuble-sided sticker may remain on the adhesion point
- Do not use it for purposes other than the intended purpose
Call us
Orders support!
Working Hours